Articles

Study of the Mechanisms Underlying the Fresh-State Response of Cementitious Materials Modified with Nanoclays

Kawashima, Shiho; Kim, Jae Hong; Corr, David J.; Shah, Surendra P.

The fresh-state properties of concrete can be tailored to meet the needs of specific applications, such as reduced formwork pressure for self-consolidating concrete (SCC), which requires high flowability, and slipform paving concrete, which requires compactibility during casting followed by enhanced green strength immediately after placement. Small additions of clays (especially nanoclays) have been found to be very effective in achieving these properties. The purpose of this study was to examine concentrated cement–clay systems at multiple scales to gain a better understanding of the mechanisms underlying this behavior. This was done by investigating the macroscopic flow properties over time through a shear rheological approach, where the viscosity evolution under a constant applied shear rate and a measure of structural rebuilding over time were obtained. The measured flow parameters were used to describe the microstructure in the plastic state through the Krieger–Dougherty model. This was then tied in with results obtained previously through scanning laser microscopy, a direct measure of the microstructure by focus beam reflectance method (FBRM). The dominating mechanisms behind the stiffening behavior were determined, and ultimately used to explain the response of SCC for lab-scale simulations of formwork pressure. The effective solid volume fraction and maximum packing density were found to be useful parameters in doing so, and helped to explain why nanoclays are an effective mineral admixture in modifying SCC for reducing formwork pressure.

Files

  • thumnail for cbm2012_kawashima__NC_.pdf cbm2012_kawashima__NC_.pdf application/pdf 979 KB Download File

Also Published In

Title
Construction and Building Materials
DOI
https://doi.org/10.1016/j.conbuildmat.2012.06.057

More About This Work

Academic Units
Civil Engineering and Engineering Mechanics
Publisher
Elsevier
Published Here
June 25, 2015