Microcavity vacuum tube pressure sensor for robot tactile sensing Jiang J. C. author Columbia University. Electrical Engineering White R. C. author Columbia University. Electrical Engineering Allen Peter K. author Columbia University. Computer Science Columbia University. Computer Science originator text Articles 1991 English A novel microstructure pressure sensor for robot tactile sensing is currently under development. The design is based on a silicon vacuum diode configuration, which has a cold field emission cathode and a movable diaphragm anode. The cathode is a sharp tip. When a positive potential difference is applied between the cathode tip and anode, an electric field is generated at the tip that allows electrons to tunnel from inside the cathode to the vacuum outside, if it exceeds about 5×107 V/cm. The field at the tip and the quantity of electrons emitted or emission current are controlled by the anode potential. The anode deflects in response to differential pressure to produce current-change. Robotics Transducers '91 : digest of technical papers : 1991 International Conference on Solid-State Sensors and Actuators Piscataway, NJ IEEE 1991 238 240 http://dx.doi.org/10.1109/SENSOR.1991.148846 </titleInfo> </relatedItem> </relatedItem> <identifier type="hdl">http://hdl.handle.net/10022/AC:P:15244</identifier> <location> <physicalLocation authority="marcorg">NNC</physicalLocation> </location> <recordInfo> <recordContentSource authority="marcorg">NNC</recordContentSource> <recordCreationDate encoding="w3cdtf">2012-11-12 10:51:04 -0500</recordCreationDate> <recordChangeDate encoding="w3cdtf">2012-11-12 11:00:34 -0500</recordChangeDate> <recordIdentifier>9246</recordIdentifier> <languageOfCataloging> <languageTerm authority="iso639-2b">eng</languageTerm> </languageOfCataloging> </recordInfo> </mods>